It consists of a hard anodised aluminium base 250mm wide, 290mm deep and 8mm thick. A column of stainless steel with a 19mm diameter…
Multiheight Microposition Probe Stand
and a height of 200mm secured to the base supports the probe head raising and lowering mechanism which incorporates the vertical slide, and operates lever shaft, and micro-switch. The vertical slide carries the probe-head, secured by a clamp screw. The probe-head is placed so that the micro-switch does not transmit current until the contact between the probes is up. Lost motion switches the current off before the probes are raised. The probe arm is very flexible on the vertical shaft, being adjustable to various heights in order to allow probing onto either flat, large or thick materials. For example, a thermal chuck or a shallow dish containing LN2 could be positioned on the base plate and the arm could be adjusted to permit the probe to be lowered onto a sample either submerged in liquid nitrogen or situated upon the heated stage. The Multi Height probe can facilitate the measurement of wafers or larger materials up to 10″ x 10″ (or with a 12″ x 12″ working area for the same price), ingots, and materials that are up to 6″ in height. A longer post option allows the measurements of even taller materials. The Multi Height Probe provides one Cylindrical probe head included.
|
Max. sample size |
Samples up to 250mm diameter (300mm option at no extra cost) |
|
|
Max. sample thickness |
Samples up to 250mm high can be measured (higher on |
|
|
Microswitch |
Prevents current flow when probe is not in contact with the |
|
|
Manual Control |
Simple lever operation for probe contact and removal |
|
|
Simple set up |
Single wire connects the probe stand and electronics |
|
|
X-Y Stage |
Offers micrometer controlled manipulation of small samples |
|
|
Automation |
Optional automated z-motion is available |
|
System Configuration
Component parts:
A.Measurement Base – 1pc
B.Multiheight assembly – 1pc
C. Multiheight Column – 1pc
D. Four point probe head – 1pc
E. Connecting cable – 1pc
F.Micrometer table – 1pc for samples up to 76mm diameter (removable)
System Footprint
A. Multiheight Base: 250mm W x 290mm L x 8mm H (320mm x 370mm x 8mm option) B. Multiheight Probe
assembly: 60mm W x 280mm L x 80mm H (60mm x 330mm x 80mm option)
C. Multiheight Column: 19mm diameter, 200mm L (up to 1m on request)
|
Type |
Tip R |
Force |
Spacing |
|
|
A |
40u |
100g |
1mm |
|
|
B |
100u |
100g |
1mm |
|
|
C |
200u |
100g |
1mm |
|
|
D |
500u |
70g |
1mm |
|
|
E |
40u |
200g |
1.591mm |
|
|
F |
40u |
100g |
0.635mm |
|
|
G |
100u |
100g |
0.635mm |
|
|
H |
200u |
100g |
0.635mm |
Type A-D and F-H are user adjustable in the range 60g-150g and supplied at value shown
